News

News

JSW Have Launched 'TEX34αIII', A New Twin Screw Extruder System

Data: 2018-12-03
Views: 260

JSW have launched 'TEX34αIII', a new twin screw extruder system

 Booth Number:B370


JSW have launched a new model of 'TEX-αIII' Twin Screw Extruder series, "TEX34αIII" which have pursued a high performance to redefine "the high performance small-sized extruders" in market.


This extruder is a successor of TEX30α, have been developed based on the JSW's extrusion technology and its functions have been expanded for our customers' needs.


JSW have launched 'TEX34αIII', a new twin screw extruder system

TEX34αIII-52.5BW-2V (Built-in model, L/D=52.5)


Length: approx. 4,250 mm

Width: approx. 1,250 mm (incl. invertor panel)

Center height: approx. 1,200 mm

Weight: approx. 3,500 kg


Further various line-up of extruder models


"TEX34αIII" is newly added to "TEX-αIII" line-up and can provide an optimized performance as small-sized extruder for small-lot production lines.


Easy working property (development from conventional structure)


EZ-Change tie-bar system has been adopted for barrel connection. Barrel exchanges can be done more easily.


Two type models for matching applications and needs


Two type models, a standard model and a built-in model, are available for various customer needs.


The standard model is suitable for customizing extruder specs such as multiple vents, long L/D ratio and high screw speed (3-type of motor capacities are available). Furthermore it can be applied to explosion proof requirement.


The built-in model has a built-in control cabinet in its frame and allows you to save installation space and installation work time.



Specification



Basic specifications
Model
Built-in modelStandard model
Torque density
Nm/cm318.2
TorqueNm982
Nominal diameter
mmφ34
Screw diametermmφ36
Extruder
Motor capacity
kW37375575
Screw speed*1rpm37~363~56837~363~56854~541~84773~735~1,150
Heating / cooling*2
AW / BWAW / BW / SW / (O)
Screw configuration

Customizable
Barrel configuration

Customizable
Barrel connection
EZ-change tie-bar type
L/D ratio
52.5max. 77
Construction

Box type
JSW have launched 'TEX34αIII', a new twin screw extruder system
Single frame type
JSW have launched 'TEX34αIII', a new twin screw extruder system
Center height
mm1,200nominal 900 (customizable)
Control & Operation panel
Control panel

Built-in *3Separated
Operation panel

Built-inOn-frame / Built-in control panel / Stand alone
Others
Explosion proof

N/AAvailable

*1:Displayed min.~torque const.~power const.
*2:A;aluminium cast heater, B;brass cast heater, S;steam heating, (O);oil heating, W;water cooling
*3:For hazardous areas, the customized model may be applied.




Variety of accessories



JSW offer full line of compound system, from material feeders to pelletizing device.


Especially 'J-NX series' weighing feeders can be integrated through our original control system 'EXANET', which allows customers to have an integrated operational control.


Other JSW's technology such as data logging system "NET100" also accelerate data analysis.


Options


Compact weighing feeder (J-NX series and others), side feeder (TSF30), side feeder deaerator (SFD-30E), barrel cooling water unit, vacuum pump, strand bath, strand pelletizer, gear pump, under water pelletizer with pellet conveying water system and screen changer, etc. Ask JSW representatives for more details.


Other applicable options


Screw element (incl. TKD), long hopper barrel, long vent barrel, NIC barrel, dewatering barrel, side vent, operation data logging system "NET100", extrusion simulation software "TEX-FAN"*1, screw design software "TEX-GEO" and screw element manage software "TEX-GEO LIST"*2, etc.
*1: TEX-FAN bundles "TEX-GEO" and "TEX-GEO LIST".
*2: TEX-GEO LIST is bundled in "TEX-GEO".


News / Recommended news More
2020 - 01 - 22
Heusler alloys are magnetic materials made from three different metals that are not magnetic individually. The alloys are used broadly for their magnetic and thermoelectric properties, and their ability to regain their original shape after being deformed, known as shape memory. Investigations by Tohoku University's advanced materials scientist An-Pang Tsai and colleagues now show that these materi...
2020 - 01 - 10
3D printed Titanium alloys under an electron microscope: sample on the left with large, elongated crystals was printed conventionally, while sample on the right with finer, shorter crystals was printed sitting on a ultrasonic generator. Credit: RMIT UniversityResearchers have used sound vibrations to shake metal alloy grains into tighter formation during 3-D printing.A study can have a signif...
2020 - 01 - 03
The ability to 3D print titanium-alloy objects certainly does open up some intriguing possibilities. That said, the finished items aren't always as strong as they could be. Now, new research suggests that adding copper to those alloys could make a big difference.Typically, when objects are being 3D printed out of titanium alloy, a laser is used to selectively melt a powder consisting of titan...
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch
Tel:4000 778 909
E-mail:irisexpo@163.com
  
Guangzhou Branch
Tel:020-8327 6389
E-mail:pmchina@unifair.com

CCEC CHINA official website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone