News

News

5 reasons to use titanium alloy springs

Data: 2019-11-29
Views: 237

In surgical components, implantables and other medical devices, springs play a variety of critical roles. Selecting the right spring material can often yield notable improvements in performance, lifespan and cost.


In many medical applications, titanium alloy springs provide critical benefits compared to stainless steels or other materials. A careful cost-benefit analysis can help to ensure the best material is selected.


Corrosion resistance and material stability

Titanium provides remarkable corrosion resistance. This, along with its non-magnetic properties, makes it ideal for many medical and dental applications. While stainless steel has been the material of choice in the past, more and more parts are being designed to take advantage of this very light, strong, non-magnetic material with its excellent corrosion resistance.


Titanium components are often recognized for their biocompatibility, and typically remain static once implanted. Some think of titanium as a material with the same characteristics of bone.


Reduced spatial requirements

Due to titanium’s lower torsional modulus, a titanium spring will require fewer coils than a steel spring to produce a similar load, even when using the same wire diameter. Similarly, a titanium spring can achieve a spring rate (the amount of force required to deflect a spring) with fewer active coils than a similar stainless steel spring.


This often reduces a spring’s free-height, saving space as well as weight. These spatial benefits can be substantial, especially when designing micro-size assemblies.


Stress limitations must always be taken into consideration. In some cases, it may be necessary to increase the wire size to keep the stress in check.


Space savings can be demonstrated using the following formula, in which:

  • n – active coils.

  • G – modulus in torsion.

  • d – wire size.

  • R – rate.

  • D – mean diameter.

  • n = (G * d ^4) / (8 * R * D ^3).

  • Modulus in torsion for 302 stainless steel: 10 x 10^6 (design reference only).

  • Modulus in torsion for titanium: 5.6 x 10^6 (design reference only).

In this calculation, a titanium spring would require half of the active coils compared to a stainless steel spring with the same dimensional values.


Lightweight

Reducing the weight of surgical tools, equipment and implantables has become increasingly important. Titanium instruments are much lighter than similar stainless steel instruments and retain their strength even after being subjected to cyclic loading. Titanium is recognized as having one of the highest metal strength-to-weight ratios.


Process-tolerant

Medical parts are often exposed to a variety of environmental changes as they move through forming, assembly, cleaning and shipping. A component may undergo several cleaning and inspection processes before packaging. When put into use, these same parts can be exposed to harsh sanitizing agents as well as bodily fluids. Titanium’s stability from initial forming to final implantation can be critical in a spring’s performance. The complete process — from material specification to packaging design — should be detailed in advance.


Cost considerations

Often, the biggest concern when specifying titanium is cost. While material prices depend on a metal’s purity, titanium typically costs five to seven times more than stainless steel. However, given the relatively small size of most medical applications, as well as the performance benefits over the life of the product, the initial cost of titanium is often negated.

Modern CNC machining also holds tight tolerances, reducing errors and waste, and computerized processes have decreased set-up times. Ongoing improvements in forming technology make using higher-cost materials, like titanium, more attractive.

Recent advancements also produce titanium wire more cost-effectively. While many high-volume manufacturing runs still specify other types of material, the transition to titanium is increasingly common.


Spring expertise

To confirm parts will perform as expected, designers should always consult a spring engineer to review material and component specifications. Leading spring manufacturers regularly produce components from titanium, with efficient processes that minimize scrap, minimize part handling and meet strict compliance requirements. Always rely on the expertise of a spring engineer before finalizing material selection.


Via: https://www.medicaldesignandoutsourcing.com/why-use-titanium-alloy-springs/

Note: Content may be edited for style and length.


News / Recommended news More
2020 - 06 - 17
A new study by researchers at Cranfield University in the UK finds that switching from aluminum to zinc alloys in the production of automotive parts could greatly enhance their longevity and sustainability.The study, conducted by Cranfield’s Sustainable Manufacturing Systems Center, evaluated the performance of three different alloys (aluminum-A380, magnesium-AZ91D and zinc-ZA8) considering overal...
2020 - 05 - 14
MIM is currently the most scientific near net shape forming technology for metal parts formation. It can flexibly adjust to various performance indexes and has been successfully applied to popular areas such as auto parts, 3C digital, medical equipment and tool locks. Hence, traditional molding technologies such as CNC fine processing, to some extent, are being replaced. Although the future of MIM...
2020 - 05 - 14
The East China Powder Metallurgy Technology Exchange Meeting, rotationally presented by the powder metallurgy societies in East China, has been successfully held for 17 years since 1982. It’s considered as one of the important platforms for China's powder metallurgy industry exchanges, and has actively promoted the flourishing development of the industry and related industries in East China an...
2020 - 05 - 14
Advanced ceramics are widely applied in industry sectors, high-tech world and new industries. With annual growth rate of 8%, its market in China values hundreds of billions of CNY. In recent years, the acceleration of China’s high-end industries and new industries development, for example, advanced manufacturing, 5G communications, semiconductor equipment and chip packaging, 3D printing and new en...
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch
Tel:4000 778 909
E-mail:irisexpo@163.com
  
Guangzhou Branch
Tel:020-8327 6389
E-mail:pmchina@unifair.com

CCEC CHINA official website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone