News

News

A new rare metals alloy can change shape in the magnetic field

Data: 2019-09-11
Views: 323

A new rare metals alloy can change shape in the magnetic field

Scientists developed multifunctional metal alloys that emit and absorb heat at the same time and change their size and volume under the influence of a magnetic field


Scientists from Peter the Great St.Petersburg Polytechnic University (SPbPU) with their colleagues developed multifunctional metal alloys that emit and absorb heat at the same time and change their size and volume under the influence of a magnetic field. This effect is caused by changes in the structure of the substance. The alloys may be used in medicine and industry. The project was supported by the Russian Foundation For Basic Research and carried out as a part of the state assignments of the Federal Agency for Scientific Organizations and the Ministry of Education and Science of the Russian Federation.


When magnetized, certain bodies change their volume and linear dimensions. This phenomenon is called magnetostriction. The shape changes depend both on the properties of the magnetic field and on the substance structure. The biggest changes usually occur in strongly magnetic materials such as nickel, iron, and cobalt oxide alloys. However, the magnetic properties of rare metals require additional studies and are of great interest today.


A team of scientists from Peter the Great St. Petersburg Polytechnic University calculated the combination of components in an alloy that would allow for heat absorption and emission and shape and size changes within a wide variety of temperatures including those close to human body temperature. In such an alloy terbium, dysprosium, gadolinium, and cobalt should be combined as 0.2:0.8-x:x:2, and aluminium should be added to them to reach the ratio of 0.2:0.8-x:x:0.9:0.1 (where x is a variable). The alloys were manufactured in the Institute of Electrical Engineering at Leibniz University Hannover.


The obtained material may be used to develop magnetostrictive transducers. They serve as sensors, filters, and resonators that transform the magnetic field into mechanical oscillations and vice versa. This is an important function for various devices, such as material integrity controllers that help find air bubbles within constructions. If such bubbles are not identified and removed, they may cause cracks and damage. Moreover, a transducer can serve as a basis for developing sensitive vibration gauges used to register earthquake shocks, as well as a source and a receiver of sound waves for underwater works.


A team of specialists from the Institute of Metallurgy and Material Science of the Russian Academy of Sciences studied the effect of the magnetic field on the alloy. The surface of the substance was probed with a thin needle able to detect every indent or mount. The system worked a lot like a phonograph, but the data was transformed not in music, but in an image. The scientists demonstrated that the surface of the alloy is covered in stripes and that their layout changes under the influence of the magnetic field. Thus, they were able to see the restructuring of the metal that explains the magnetostriction effect.


'Transducers based on our alloys are going to be more durable and long-lasting than the existing analogs and will work in a wide range of magnetic fields. Moreover, the alloys may be used in medicine as they can change their shape under the influence of magnetic fields that are safe for human health. For example, one can develop arterial stents that would flow in the bloodstream in a compact form and then unfold in a given place. This is possible because the operating temperature range of our materials is close to human body temperature,' said Alexey Filimonov, the head of the Department of Physical Electronics at Peter the Great St. Petersburg Polytechnic University (SPbPU).



Via: https://www.eurekalert.org/


News / Recommended news More
2019 - 11 - 11
India's October finished steel exports surged by 60pc to 950,000t from a year ago, according to initial estimates by the Indian steel ministry.Year-to-date exports have risen by 27.7pc to 4.88mn t for April-October from the same period in 2018. India's fiscal year runs from 1 April.A surge in hot-rolled coil (HRC) exports is driving much of the growth.Indian mills are competing aggressively with A...
2019 - 11 - 07
Scientists from the National University of Science and Technology MISiS have created new aluminium alloys that are cheap and effective to use in a wide variety of modern vehicles.Aluminium and its alloys rank second after iron alloys in terms of scalability. Aluminium is easily processed by forging, stamping and rolling; it is also characterised by low density, and aluminium products are lightweig...
2019 - 10 - 30
A team of the TSU Laboratory of High-Strength Crystal Physics is creating highly entropic alloys that differ in the unusual structure of the crystal lattice. They provide new materials with mechanical characteristics that make them suitable for use in the extreme conditions of space and the Arctic – at high and low temperatures, under load, and when exposed to radiation.The object of the physicist...
2019 - 10 - 25
To reduce the manufacturing costs of making tungsten carbide tools, a team of researchers at the U.S. Army Research Laboratory has figured out how to 3D print it into the exact size and shape they want, with little to no post-machining required, according to a U.S. patent application first made public on Thursday.Tungsten carbide is hard, so hard that it’s expensive to make it into useful tools an...
Share:
Uniris Exhibition Shanghai Co., Ltd.
Shanghai Branch
Tel:4000 778 909
E-mail:irisexpo@163.com
  
Guangzhou Branch
Tel:020-8327 6389
E-mail:pmchina@unifair.com

CCEC CHINA official website
犀牛云提供企业云服务
Scan the QR code to visit the official website by phone